logo

NEWS

当前位置:
Homepage
>
>
Chemical corrosion resistant stainless steel elbow technology and maintenance

Chemical corrosion resistant stainless steel elbow technology and maintenance

  • Categories:News
  • Author:
  • Origin:
  • Time of issue:2022-07-29 17:13
  • Views:

(Summary description)Pipe fittings with flanges and rounded edges.

Chemical corrosion resistant stainless steel elbow technology and maintenance

(Summary description)Pipe fittings with flanges and rounded edges.

  • Categories:News
  • Author:
  • Origin:
  • Time of issue:2022-07-29 17:13
  • Views:
Information

Stainless steel elbow production  

 

 

1. Pipe fittings with flanges and rounded edges. The former refers to the pipe ends protruding inward or outwards, and the latter refers to the pipe fittings with ridges or grooves formed in the circumferential direction of the pipe;  

 

2. Stainless steel elbow wall thickness pipe fittings, refers to the length of the pipe to change the wall thickness;  

 

3. Stainless steel elbow bending pipe, is the straight pipe into different radius of curvature of the elbow, such as elbow, elbow and so on;  

 

4. Stainless steel elbow pipe with variable diameter means that the diameter of the pipe end or a part of the pipe is reduced;  Pipe fittings with crimping and sealing type, which increase the total strength of the pipe end to the outside or inside of the pipe or seal the pipe end;  

 

5. Change the section of the pipe fitting, according to the requirements, the circular section into square, oval, polygon and so on.  

 

 

Stainless steel elbow maintenance method  

 

1. If you place it for a long time, check it regularly. Clean the exposed processing surface, clear dirt and dirt, and then prevent it from being in a ventilated and dry place.  

 

 

2. The device, under normal circumstances, can be installed in the arbitrary position of the pipeline, but to facilitate operation and inspection, pay attention to the stainless steel elbow medium should be below the vertical valve disc, stainless steel elbow intelligent horizontal device.  

 

3. Stainless steel elbow ball valve, globe valve and other valves in use, intelligent full open or full ratio, can not be used to regulate the flow, to face sealing surface by erosion, speed up wear.  

 

4. Stainless steel elbow using the first round, can not rely on levers or other things, to avoid damage to the valve.  Hand wheel clockwise rotation is closed, otherwise it is open, but also ensure the use of methods and techniques.  

 

5. Stainless steel elbow valve packing gland bolts should be tightened evenly, should not be pressed into crooked condition, to avoid collision prevent stem movement or leakage.  

 

6. Stainless steel elbow in the process of use, should always be kept clean, transmission thread smooth as scheduled, found fault, should immediately stop using, find out the cause of elimination of problems. 

Keyword:

Scan the QR code to read on your phone

logo
Tel
Fax:
E-mail
Office Add

Tel: +86 157 2731 7311
Tel: +86 157 2731 7311
E-mail: sales@whsteelfittings.com

Factory Add:Zhenggang Industrial Park, Yanshan County, Cangzhou City Hebei Province, China.

tel
fax
e-mail
Office Add

Tel: +86 157 2731 7311
Tel: +86 157 2731 7311
E-mail: 
sales@whsteelfittings.com

Office Add:No.8013 FuHuaHongYan Building,HongYan South road,Chaoyang District ,Beijing ,P.R.CHINA

SOCIAL MEDIA

Copyright © 2020 WH-STEEL     冀ICP备20009811号   Powered by www.300.cn