NEWS
Welding technology for bending pipe
- Categories:News
- Author:
- Origin:
- Time of issue:2021-09-30 10:59
- Views:
(Summary description)
Welding technology for bending pipe
(Summary description)
- Categories:News
- Author:
- Origin:
- Time of issue:2021-09-30 10:59
- Views:
Welding technology for bending pipe
Welding gap, blunt edge size, groove angle, these three parameters are important factors affecting the quality of welding.
The welding groove is generally formed by flame gas cutting or machining. The machining groove has good quality, but the cost is high, and it is limited by various factors such as the size of the workpiece and the site; the cost of the flame cutting groove is low and convenient, and it is widely used, but the quality is often not so good. Therefore, the gas cutting groove needs to be trimmed after the gas cutting is completed. Regardless of the method used to prepare the groove, the dimensions of the groove should be within tolerance. The size of the groove mainly refers to the groove angle and the blunt edge size, and the size of the arc R is also included for the U-shaped groove.
Scan the QR code to read on your phone
Tel: +86 157 2731 7311
Tel: +86 157 2731 7311
E-mail: sales@whsteelfittings.com
Factory Add:Zhenggang Industrial Park, Yanshan County, Cangzhou City Hebei Province, China.
Tel: +86 157 2731 7311
Tel: +86 157 2731 7311
E-mail: sales@whsteelfittings.com
Office Add:No.8013 FuHuaHongYan Building,HongYan South road,Chaoyang District ,Beijing ,P.R.CHINA
SOCIAL MEDIA
Copyright © 2020 WH-STEEL 冀ICP备20009811号 Powered by www.300.cn