logo

NEWS

当前位置:
Homepage
>
>
Technical requirements for high pressure hot drawing tee fitting

Technical requirements for high pressure hot drawing tee fitting

  • Categories:News
  • Author:
  • Origin:
  • Time of issue:2020-10-21 09:33
  • Views:

(Summary description)When designing and manufacturing high-pressure hot-drawn tee pipe fittings, strict standards shall be required, and the products shall meet the following technical requirements: 1. After heat treatment of high-pressure hot drawing tee pipe fitting, the metallographic structure is the same as the raw material.The surface hardness of alloy steel was HB125~197.The surface hardness of galore steel is HB217. 2. No cracks are allowed on the surface of high-pressure hot-drawn tee pipe fitting. The depth of defects such as smooth surface, scars and folds should not be greater than 1.6mm. 3. The geometric size and deviation of high-pressure hot drawing tee pipe fitting, such as the inner and outer diameter of the port, the internal and external groove, the deviation of the Angle of the end face and the height of the branch pipe shall meet the requirements of the drawing. The butt wall thickness of the product port shall not be less than the minimum allowable value of the nominal thick wall of the connection pipe.The ellipticity outside the port shall not be greater than 6% of the nominal outside diameter;When the port wall thickness is greater than 1.15 times of the pipe wall thickness, the internal groove shall be reprocessed according to the standard. 4. The flow area of high-pressure hot drawing tee pipe fitting shall not be less than 90% of the flow area of the main pipe. WH-STEEL is a pipe fitting manufacturer in China, the company is located in China's famous pipeline products production base - Cangzhou city, Hebei province.Our pipeline products are sold to more than 30 countries in the world, and we have become a loyal partner of over 100 enterprises, including sinopec, national oil and gas company of uzbekistan, LUKOIL of Russia, hyundai of Korea, petronas of Malaysia, BP of Britain, etc.Welcome to purchase our products.  

Technical requirements for high pressure hot drawing tee fitting

(Summary description)When designing and manufacturing high-pressure hot-drawn tee pipe fittings, strict standards shall be required, and the products shall meet the following technical requirements:

1. After heat treatment of high-pressure hot drawing tee pipe fitting, the metallographic structure is the same as the raw material.The surface hardness of alloy steel was HB125~197.The surface hardness of galore steel is HB217.

2. No cracks are allowed on the surface of high-pressure hot-drawn tee pipe fitting. The depth of defects such as smooth surface, scars and folds should not be greater than 1.6mm.

3. The geometric size and deviation of high-pressure hot drawing tee pipe fitting, such as the inner and outer diameter of the port, the internal and external groove, the deviation of the Angle of the end face and the height of the branch pipe shall meet the requirements of the drawing. The butt wall thickness of the product port shall not be less than the minimum allowable value of the nominal thick wall of the connection pipe.The ellipticity outside the port shall not be greater than 6% of the nominal outside diameter;When the port wall thickness is greater than 1.15 times of the pipe wall thickness, the internal groove shall be reprocessed according to the standard.

4. The flow area of high-pressure hot drawing tee pipe fitting shall not be less than 90% of the flow area of the main pipe.

WH-STEEL is a pipe fitting manufacturer in China, the company is located in China's famous pipeline products production base - Cangzhou city, Hebei province.Our pipeline products are sold to more than 30 countries in the world, and we have become a loyal partner of over 100 enterprises, including sinopec, national oil and gas company of uzbekistan, LUKOIL of Russia, hyundai of Korea, petronas of Malaysia, BP of Britain, etc.Welcome to purchase our products.

 

  • Categories:News
  • Author:
  • Origin:
  • Time of issue:2020-10-21 09:33
  • Views:
Information

When designing and manufacturing high-pressure hot-drawn tee pipe fittings, strict standards shall be required, and the products shall meet the following technical requirements:

1. After heat treatment of high-pressure hot drawing tee pipe fitting, the metallographic structure is the same as the raw material.The surface hardness of alloy steel was HB125~197.The surface hardness of galore steel is HB217.

2. No cracks are allowed on the surface of high-pressure hot-drawn tee pipe fitting. The depth of defects such as smooth surface, scars and folds should not be greater than 1.6mm.

3. The geometric size and deviation of high-pressure hot drawing tee pipe fitting, such as the inner and outer diameter of the port, the internal and external groove, the deviation of the Angle of the end face and the height of the branch pipe shall meet the requirements of the drawing. The butt wall thickness of the product port shall not be less than the minimum allowable value of the nominal thick wall of the connection pipe.The ellipticity outside the port shall not be greater than 6% of the nominal outside diameter;When the port wall thickness is greater than 1.15 times of the pipe wall thickness, the internal groove shall be reprocessed according to the standard.

4. The flow area of high-pressure hot drawing tee pipe fitting shall not be less than 90% of the flow area of the main pipe.

WH-STEEL is a pipe fitting manufacturer in China, the company is located in China's famous pipeline products production base - Cangzhou city, Hebei province.Our pipeline products are sold to more than 30 countries in the world, and we have become a loyal partner of over 100 enterprises, including sinopec, national oil and gas company of uzbekistan, LUKOIL of Russia, hyundai of Korea, petronas of Malaysia, BP of Britain, etc.Welcome to purchase our products.

 

Keyword:

Scan the QR code to read on your phone

logo
Tel
Fax:
E-mail
Office Add

Tel: +86 157 2731 7311
Tel: +86-317-6392671
E-mail: sales@whsteelfittings.com

Factory Add:Zhenggang Industrial Park, Yanshan County, Cangzhou City Hebei Province, China.

tel
fax
e-mail
Office Add

Tel: +86 157 2731 731
Tel: +86-10 -57163742
E-mail: 
sales@whsteelfittings.com

Office Add:No.8013 FuHuaHongYan Building,HongYan South road,Chaoyang District ,Beijing ,P.R.CHINA

SOCIAL MEDIA

Copyright © 2020 WH-STEEL     冀ICP备20009811号   Powered by www.300.cn