The cycloid reducer of the eccentric reducer supplier, the full name of the cycloid reducer, is a novel transmission device that applies the principle of planetary transmission and adopts the meshing of cycloid pins.

　　The supplier of the eccentric reducer is equipped with a double eccentric sleeve that is misaligned by 180° on the input shaft, and two roller bearings called swing arms are installed on the eccentric sleeve to form an H mechanism, and the center hole of the two cycloidal wheels is the eccentric sleeve. The raceway of the upper swivel arm bearing is meshed with a group of annularly arranged needle teeth on the needle gear by the cycloidal wheel to form an internal meshing deceleration mechanism with a tooth difference of one tooth.

　　Classification of cycloid reducer by eccentric reducer supplier

　　The eccentric reducer supplier has three series of cycloid reducers: B series (equivalent to Ministry of Machinery standard & Shanghai standard), X series (equivalent to Ministry of Chemical Industry standard & Tianjin standard) and Z series (equivalent to national standard). Different production standards are mainly reflected in some structural dimensions, and their performance indicators are basically the same.

　　In addition, there is a miniature cycloidal pinwheel reducer of WB series, which adopts high-pressure die-casting aluminum alloy shell, which has higher precision and smaller volume. When some WB series reducers are installed with flanges, the installation flanges will be different from the common cycloid reducers.

　　The eccentric reducer supplier Cycloidal reducer is available in primary, secondary and tertiary. Among them, the two-stage and three-stage reducers are usually obtained by combining multiple first-stage reduction modules.