quality 1D Bend company Bend company should do a good job of its electric power measures in the process of processing. The circuit of the insulator of the product always exists at the joint connection. Do not touch it during use. If the bend is an external auxiliary power supply wire socket It has been assembled and cannot be touched during use.

　　With the development of the pipe bending industry, the products of quality 1D Bend company can be seen in many places no matter in daily life or work. The application of pipe bending in petroleum, electric power, chemical industry, navigation, etc. is Very extensive, mainly in gas transportation, oil transportation, infusion, etc.

　　quality 1D Bend company Bend pipes must be processed in accordance with relevant standards and regulations during the processing process. The product is not allowed to be unstable no matter what height it is processed to. Passed the inspection.

　　If there is a cracked or deformed bent pipe support rod in the bent pipe, its connectors and fasteners are prohibited from being used. The fasteners and connectors of the bent pipe shall not be welded, and the base ground of the bent pipe shall be flat , hard, rammed. quality 1D Bend company reminds that the elbow should not have any deformation during use. When the ground is soft, use a sweeping pole or a backing plate to increase the force surface and increase stability.

　　quality 1D Bend company In the process of cleaning, the elbow can use its volume to clean the surface of its steel, and remove its oil, grease and dust. It can't remove the rust and oxidation of the steel surface during use. skin, solder, etc.