Flanged pipe fitting is also known as flange plate or protruding edge. Flanged pipe fittings are connected parts between pipes, used for connection between pipe ends; It is also useful for the flange pipe fittings on the inlet and outlet of equipment, for the connection between two equipment, such as the flange pipe fittings of reducer. Flanged pipe fitting connection or flange pipe fitting joint refers to the detachable connection of the flange pipe fitting, gasket and bolt as a group of combined sealing structure. Pipe flange fittings refer to the flanged fittings of piping equipment and the inlet and outlet flanged fittings of equipment when used in equipment. There are holes in the flanged fittings and the two flanged fittings are connected by bolts. Flanged pipe fitting between the gasket seal. Flange fittings are divided into thread connection (thread connection) flange fittings, flange fittings and clamp flange fittings.

Flanged pipe fittings are used in pairs. Low-pressure pipes can use wire connected flange fittings. Flanged pipe fittings are used for more than four kilograms of pressure. Add a gasket between the plates of two flanged pipe fittings, and then tighten them with bolts. Different pressure of the flange fittings of different thickness, they use different bolts. When water pumps and valves are connected with pipes, the parts of these devices and equipment are also made into the corresponding shape of flange fittings, also known as flange fittings connection. All the connecting parts that are closed together with bolts on the periphery of the two planes are generally called "flange fittings". Such as the connection of ventilation pipes, this kind of parts can be called "flange fittings parts". But this connection is only a part of the equipment, such as the connection between the flange pipe and the pump, it is not good to call the pump "flange pipe parts". Comparatively small, such as valves, can be called "flange pipe parts". Reducer flange fittings are used for the connection between motor and reducer, and the connection between reducer and other equipment.

WH-Steel is a Chinese pipe fitting manufacturer. Our main products include flange, elbow, elbow, tee, four, pipe cap and other products. Welcome to purchase our quality products.