Language

русский

Português

NEWS

当前位置：

Homepage

News

Stainless steel elbow application measures and matters needing attention

Categories:News
Author:
Origin:
Time of issue:2021-09-01 16:21
Views:

(Summary description)In the use and maintenance of stainless steel elbow needs to pay attention to a lot of matters, demand users in accordance with a certain method of use, in accordance with the accurate and fair method of use and maintenance.

Stainless steel elbow application measures and matters needing attention

Categories:News
Author:
Origin:
Time of issue:2021-09-01 16:21
Views:

Information

Long time storage of stainless steel elbow, should be checked as scheduled, often on the surface of the processing must adhere to clean, remove dirt, neatly stored in the indoor drab dry local, prohibit piling or open storage.Often adhere to the stainless steel elbow dry and ventilation, adhere to the cleanliness and tidiness of the device, in accordance with the accurate storage method.
Equipment, stainless steel elbow according to the connection method of direct equipment in the pipeline, according to the position of the use of equipment.In general, the equipment can be in the arbitrary position of the pipeline, but it needs to be easy to operate the inspection, pay attention to the flow of the medium of the stainless steel elbow should be upward from the bottom of the vertical valve disc, and the stainless steel elbow can only be horizontal equipment.Stainless steel elbow in the equipment to pay attention to the sealing, to avoid the phenomenon of leakage, affect the normal operation of the pipeline.
Stainless steel elbow ball valve, globe valve, gate valve use, only fully open or fully closed, do not allow to adjust the flow, avoid sealing surface erosion, speed up wear.There is an inverted sealing device in the gate valve and the upper thread globe valve, and the handwheel is tightened to the top position to prevent the media from leaking from the packing.
Stainless steel elbow handwheel, do not rely on levers or other tools, to avoid damage to the valve.If the hand wheel rotates clockwise, it is closed, otherwise, it is open.
Stainless steel elbow valve packing gland bolts should be tightened evenly, should not be pressed into a crooked state, to avoid collision hindering stem movement or leakage.
Stainless steel elbow in the use of the process, should always adhere to clean, transmission thread must be smooth as scheduled, found fault, should immediately stop using, find out the cause of eliminating the problem.