The main difference between stainless steel elbows and carbon steel elbows is the difference in material. The chemical composition contained in the elbow will keep the surface of the elbow from rust and corrosion for a long time. In the pipeline system, the elbow is a pipe fitting that changes the direction of the pipeline. So how much do you know about the installation knowledge of stainless steel elbows? Follow the editor of Stainless steel 45° Elbow For sale to have a simple understanding!
1. Before installation, you need to carefully check the various standards of the stainless steel elbow, whether the diameter meets the use requirements, eliminate the defects caused by the transportation process, and eliminate the dirt of the stainless steel elbow, make preparations before installation, and everything is ready.

2. During installation, the stainless steel elbow can be directly installed on the pipeline according to the connection method, and the installation is carried out according to the position of use. Under normal circumstances, it can be installed at any position in the pipeline, but it needs easy-to-operate maintenance. Note that the medium flow direction of the cut-off stainless steel elbow should be upward from the vertical valve disc, and the stainless steel elbow can only be installed horizontally. When installing stainless steel elbows, pay attention to the tightness to prevent leakage and affect the normal operation of the pipeline.
3. The bolts of the stainless steel elbow valve packing gland should be evenly tightened, and should not be pressed into a crooked state, so as to avoid bruising, hindering the movement of the valve stem or causing leakage.
The above is the introduction of Stainless steel 45° Elbow For sale editor: a brief introduction to the installation knowledge of stainless steel elbows.