logo

NEWS

当前位置:
Homepage
>
>
Maintenance and maintenance of stainless steel valve elbow

Maintenance and maintenance of stainless steel valve elbow

  • Categories:News
  • Author:
  • Origin:
  • Time of issue:2021-05-31 11:02
  • Views:

(Summary description)Maintenance and maintenance of stainless steel valve elbow

Maintenance and maintenance of stainless steel valve elbow

(Summary description)Maintenance and maintenance of stainless steel valve elbow

  • Categories:News
  • Author:
  • Origin:
  • Time of issue:2021-05-31 11:02
  • Views:
Information

There are many things to pay attention to when using and maintaining stainless steel elbows. Users need to use them in a certain way, and use and maintain them in an accurate and fair way. The matters needing attention are as follows:   

1. The stainless steel elbows stored for a long time should be inspected regularly. The exposed processing surface must be kept clean, cleaned of dirt, and stored neatly in a ventilated and dry place indoors. It is strictly forbidden to stack or store in the open air. Always keep the stainless steel elbow dry and ventilated, keep the device clean and tidy, and store it in accordance with the accurate storage method.   

2. When installing, the stainless steel elbow can be directly installed on the pipeline according to the connection method, and the installation is carried out according to the used position. Under normal circumstances, it can be installed at any position in the pipeline, but it needs easy-to-operate inspection. Note that the medium flow direction of the cut-off stainless steel elbow should be upward from the vertical valve disc. The stainless steel elbow can only be installed horizontally. When installing stainless steel elbows, pay attention to the tightness to prevent leakage and affect the normal operation of the pipeline.   

3. When using stainless steel elbow ball valves, globe valves, and gate valves, they are only fully open or fully closed. They are not allowed to be used for flow adjustment to avoid erosion of the sealing surface and accelerated wear. There is an inverted sealing device in the gate valve and the upper threaded stop valve, and the handwheel is turned to the highest position and tightened to prevent the medium from leaking from the packing.   

4. Stainless steel elbows should be used with hand wheels. Do not use levers or other tools to avoid damage to the valve. Turn the handwheel clockwise to close, and vice versa to open. You must be fair when using it, and ensure accurate usage methods and methods.   

5. The bolts of the stainless steel elbow valve packing gland should be tightened evenly, and should not be pressed into a crooked state, so as to avoid bruising, hindering the movement of the valve stem or causing leakage.  

 

6. ​​The stainless steel elbow should always be kept clean during use, and the transmission thread must be lubricated on schedule. When a fault is found, it should be stopped immediately to find out the cause and clear the fault.

Keyword:

Scan the QR code to read on your phone

logo
Tel
Fax:
E-mail
Office Add

Tel: +86 157 2731 7311
Tel: +86 157 2731 7311
E-mail: sales@whsteelfittings.com

Factory Add:Zhenggang Industrial Park, Yanshan County, Cangzhou City Hebei Province, China.

tel
fax
e-mail
Office Add

Tel: +86 157 2731 7311
Tel: +86 157 2731 7311
E-mail: 
sales@whsteelfittings.com

Office Add:No.8013 FuHuaHongYan Building,HongYan South road,Chaoyang District ,Beijing ,P.R.CHINA

SOCIAL MEDIA

Copyright © 2020 WH-STEEL     冀ICP备20009811号   Powered by www.300.cn