Concentric reducer manufacturers feel that the reducer plays the role of matching the speed and transmitting torque between the prime mover and the working machine or the actuator. The reducer is a relatively precise machine. The purpose of using it is to reduce the speed and increase the torque.

　　The concentric reducer manufacturer believes that the reducer is an independent component composed of a gear drive, a worm drive, and a gear-worm drive enclosed in a rigid housing, and is often used as a reduction drive between the prime mover and the working machine.

　　Concentric reducer manufacturers share the installation method of reducer:

　　The correct installation, use and maintenance of the reducer by concentric reducer manufacturers is an important part of ensuring the normal operation of mechanical equipment. Therefore, when you install the reducer, please be sure to assemble and use carefully in strict accordance with the following installation and use related matters.

　　The manufacturer of the concentric reducer recommends to confirm whether the motor and the reducer are intact before installation, and strictly check whether the dimensions of the parts connected to the motor and the reducer match. Fit tolerances.

　　Then, unscrew the screw on the dustproof hole on the outer side of the reducer flange, adjust the clamping ring so that the side hole is aligned with the dustproof hole, and insert the inner hexagon to tighten. After that, remove the motor shaft key.

　　The concentric reducer manufacturer recommends connecting the motor and the reducer naturally. When connecting, it must be ensured that the concentricity between the output shaft of the reducer and the input shaft of the motor is the same, and the outer flanges of the two are parallel.