The Eccentric Reducer supplier thinks that the conveyor belt may not be fixed properly, resulting in increased friction of the worm, serious wear of the inner shaft, and serious solid heat. part.

　　The Eccentric Reducer supplier recommends to check whether the oil circuit is damaged, whether there is a problem with the seals or if the oil is too low, and the oil level is damaged. . Check whether there are foreign objects intrusion that cause the deformation and damage of the worm gear and worm, then open the casing, and use a powerful vacuum cleaner to suck up the debris.

　　The Eccentric Reducer supplier thinks that it is possible that the worm gear and the worm gear do not match, the shaft clearance is too large, and the lubricating oil is too small. The running time is too long, which leads to the aging of the circuit parts. Replace the circuit parts that have problems. Control the use time properly. After a period of continuous operation, the machine should be stopped.