Do you understand the use skills of the reducer? Follow the editor of Best Eccentric Reducer to have a simple understanding!
1. After 200 to 300 hours of operation, the oil should be changed once, and the quality of the oil should be checked regularly in the future use, and the oil mixed with impurities or deteriorated should be replaced in time. Under normal circumstances, for a long-term continuous working reducer, the new oil should be replaced with new oil after 5000 hours of operation or once a year, and the long-term deactivated reducer should also be replaced with new oil before restarting. The reducer should be added with the same oil as the original brand, and must not be mixed with oils of different brands. Oils with the same brand but different viscosities are allowed to be mixed.
2. When changing the oil, wait for the reducer to cool down and there is no danger of burning, but it should still be kept warm, because after the complete cooling, the viscosity of the oil increases and it is difficult to drain the oil. Note: Cut off the power supply of the drive unit to prevent accidental power-on.
3. During work, when the temperature rise of the oil temperature exceeds 80℃ or the temperature of the oil pool exceeds 100℃ and abnormal noise is found, stop using it, check the cause, troubleshoot the fault, and replace the lubricating oil before continuing. Running.
In summary, the editor of Best Eccentric Reducer introduces the use skills of reducers.