logo

NEWS

当前位置:
Homepage
>
>
Hydraulic bulging process of tee pipe fittings

Hydraulic bulging process of tee pipe fittings

  • Categories:News
  • Author:
  • Origin:
  • Time of issue:2021-09-29 10:25
  • Views:

(Summary description)Because of the particularity of the process, it is widely used in pipelines of many industries.

Hydraulic bulging process of tee pipe fittings

(Summary description)Because of the particularity of the process, it is widely used in pipelines of many industries.

  • Categories:News
  • Author:
  • Origin:
  • Time of issue:2021-09-29 10:25
  • Views:
Information

Three-way hydraulic expansion process is more suitable for the molding materials are mainly cold hardening of low alloy steel, stainless steel and low carbon steel, but also can use some non-ferrous metals, such as aluminum, titanium;The three-way hot pressing molding we say is mainly to flatten the large-diameter three-way tube embryo, press to the size of the three-way diameter, and open a hole in the part of the stretching branch pipe;Before putting the tube embryo into the forming die, the tube embryo is heated, and a punching die for the stretching branch pipe is installed in the tube embryo;The tube embryo is compressed radially under pressure, and in this process, the metal in the tube embryo flows to the direction of the branch pipe, and finally the branch pipe is formed under the tensile action of the die.
 

 

The whole process of forming is realized by radial compression of tube embryo and extension of branch tube.Compared with the hydraulic expansion tee, the metal of the hot pressing tee is realized by radial movement of the tube embryo.So we call this process radial compensation process.Because the heated tube embryo will restrict the tee, the tonnage required during the material forming process should be reduced.For the practicality of materials, hot pressing tee is relatively wide, more suitable for alloy steel and stainless steel materials;Especially large diameter and thick wall of the tee, will often apply this process.

 

 

Tee of the hydraulic expanding technology is through the metal materials of axial compensation rose out of the branch of a molding process, this process must need to use special hydraulic press, to equal to the diameter of the three-way tube embryo injection liquid, using the hydraulic press for the synchronization of two horizontal side urn to squeeze, tube embryos are served as by certain pressure, the overall volume smaller,Due to the change of volume, the liquid inside the tube embryo will change with the change of volume of the tube embryo, and the pressure gradually increases.Once the pressure required by the expansion of the tee branch is reached, the metal material inside will expand out of the branch under the liquid pressure in the tube embryo and the liquid pressure in the side cylinder.

 

Keyword:

Scan the QR code to read on your phone

logo
Tel
Fax:
E-mail
Office Add

Tel: +86 157 2731 7311
Tel: +86 157 2731 7311
E-mail: sales@whsteelfittings.com

Factory Add:Zhenggang Industrial Park, Yanshan County, Cangzhou City Hebei Province, China.

tel
fax
e-mail
Office Add

Tel: +86 157 2731 7311
Tel: +86 157 2731 7311
E-mail: 
sales@whsteelfittings.com

Office Add:No.8013 FuHuaHongYan Building,HongYan South road,Chaoyang District ,Beijing ,P.R.CHINA

SOCIAL MEDIA

Copyright © 2020 WH-STEEL     冀ICP备20009811号   Powered by www.300.cn