logo

NEWS

Current position:
Homepage
>
News
09-16

What factors affect the quality of flanged pipe fittings?

What factors affect the quality of flanged pipe fittings
09-15

Introduction of quality 180° Elbow on sales: knowledge of elbow thinning width load!

The influence of the thinning width of the elbow on the load cannot be ignored. On the basis of the finite element analysis, the calculation formula for the ultimate pressure of the partial thinning elbow is given. The calculation and test results are appropriately consistent and safe, and the calculation formula can also be applied to the safety appraisal of some thinning elbows, which also makes up for the blank in this research.
09-15

Stainless steel 45° Elbow supplier china tells: the relevant knowledge of the elbow stamping forming process!

Stamping elbow is a forming process that has been applied to mass production of seamless elbows for a long time. It has been replaced by hot pushing or other forming processes in the production of elbows of common specifications. The quantity is small, and the wall thickness is too thick or too thin.
09-13
09-09

Cheapest Stainless steel 45° Elbow tells: The process flow of hot push elbow forming?

The hot push elbow forming process is to use a special elbow pusher, core mold and heating device, so that the blank sleeved on the mold moves forward under the push of the pusher, and is heated, expanded and bent during the movement. the process of.
09-09

What should wear-resistant elbow pay attention to in the construction process

Wear-resistant elbow in construction must pay attention to the soil, geology and other aspects of the surrounding comprehensive factors.
09-07

How to store seamless pipe correctly?

Improper storage of seamless tube will lead to rust, corrosion and other situations, so how to save the seamless tube is correct.
09-07

What are the precautions of PL Flange Manufacturers China in use?

Most people don't know that we sell the PL Flange Flange and L-Plate products in China which are the best and the best quality, in any price.
09-07

What are the advantages of PL Flange Manufacturers China?

If you want to have a good quality, fast manufacturing rate and high value product, then you have to go through the PL Flange manufacturing process.
Previous page
1
2
19
logo
Tel
Fax:
E-mail
Office Add

Tel: +86 157 2731 7311
Tel: +86 157 2731 7311
E-mail: sales@whsteelfittings.com

Factory Add:Zhenggang Industrial Park, Yanshan County, Cangzhou City Hebei Province, China.

tel
fax
e-mail
Office Add

Tel: +86 157 2731 7311
Tel: +86 157 2731 7311
E-mail: 
sales@whsteelfittings.com

Office Add:No.8013 FuHuaHongYan Building,HongYan South road,Chaoyang District ,Beijing ,P.R.CHINA

SOCIAL MEDIA

Copyright © 2020 WH-STEEL     冀ICP备20009811号   Powered by www.300.cn