First of all, when installing the Stainless Steel Flange Pipe Fitting, you can pay attention to:
(1) The aluminum flange shall have a satisfactory strength and shall not be deformed when tightened. The tightening force should be uniform and the amount of pad tightening should be controlled at 1/3 left. The carbon steel flange sealing surface should be flat and clean, and the oil and rust should be carefully arranged during the installation.
(2) The apron of the aluminum flange from the Flange Manufacturer and the specification are placed in the receiving high and low grooves in any direction and the big head, and the device that is not to be distorted should be neglected to reflect, and if the result is formed and the mouth is formed, the refined steel must be carried out. The ladle will be injected into the center bag by verifying that it is applied above the bag inlet.
(3) The gasket should have excellent oil and aging resistance, as well as good elasticity and mechanical strength.
The device should be replaced with a gasket of different cross-section and size according to the shape of the joint and placed correctly. The maintenance of the aluminum flange shall be kept clean, the dirt shall be removed, and if it is corroded or contaminated, it may be wiped with a soft cloth with alcohol, washed with water, and not cleaned with acid or alkaline. The agent should be cleaned with warm water with a lubricant or a neutral detergent. This will ensure its normal use.
I hope this helps you. We offer a variety of plumbing fittings, such as the Straight Tee , Weld Bend, ect. If you are interested, please feel free to contact us!
Zhenggang Industrial Park, Yanshan County, Cangzhou City Hebei Province, China.
No.8013 FuHuaHongYan Building,HongYan South road,Chaoyang District ,Beijing ,P.R.CHINA
Copyright © WH-STEEL Co., Ltd. All Rights Reserved |Sitemap|