Pipe Fittings, Flanges for Oil, Gas, Electric Power, Shipbuding, Chemical Engineering from WH-STEEL CO., LTD.
Home >> News

Welding stamping elbow common processing method

Feb 13, 2020

Stamping and welding elbow, that is, using the same material as the tube plate with stamping die stamping into a half ring elbow, and then two half ring elbow group welding forming.It has the advantages of simple cutting, high production efficiency and low cost.Specific operation methods are as follows:

1. For forging and pressing, the end or part of the pipe shall be extended by forging machine to reduce the outer diameter. Commonly used forging machines include rotary type, connecting rod type and roller type.

2. Stamping method: expand the tube end to the required size and shape with tapered core on the press.

3. Roller method, the core is placed in the tube, and the roller is used for edge processing.

4. Rolling method, generally do not need mandrel, suitable for thick wall tube inner round edge.

5. Zigzag forming method, there are three methods are more commonly used, one method is called extension method, another method is called stamping method, the third roller method, there are 3-4 rollers, two fixed rollers, an adjustment roller, adjust the fixed roller distance, the finished pipe is zigzag.

6. Bulging method, one is to place rubber in the tube, the top with a punch compression, so that the tube protruding shape;Another method is hydraulic forming, in which a liquid is filled in the middle of the tube, and the liquid pressure pushes the tube into the desired shape.

Stamping and welding elbow, that is, using the same material as the tube plate with stamping die stamping into a half ring elbow, and then two half ring elbow group welding forming.It has the advantages of simple cutting, high production efficiency and low cost.Specific operation methods are as follows:

1. For forging and pressing, the end or part of the pipe shall be extended by forging machine to reduce the outer diameter. Commonly used forging machines include rotary type, connecting rod type and roller type.

2. Stamping method: expand the tube end to the required size and shape with tapered core on the press.

3. Roller method, the core is placed in the tube, and the roller is used for edge processing.

4. Rolling method, generally do not need mandrel, suitable for thick wall tube inner round edge.

5. Zigzag forming method, there are three methods are more commonly used, one method is called extension method, another method is called stamping method, the third roller method, there are 3-4 rollers, two fixed rollers, an adjustment roller, adjust the fixed roller distance, the finished pipe is zigzag.

6. Bulging method, one is to place rubber in the tube, the top with a punch compression, so that the tube protruding shape;Another method is hydraulic forming, in which a liquid is filled in the middle of the tube, and the liquid pressure pushes the tube into the desired shape.

WH-STEEL has been focusing on pipeline equipment products for 20 years and has accumulated rich production experience.Welcome to choose WH-STEEL, preferential price, good service is our constant promise to you.



Elbow Packaging Elbow Packaging View More
Mitre Bend with 3LPE Mitre Bend with 3LPE View More
45°Bend with 3LPE 45°Bend with 3LPE View More
30° 4D  Bend 30° 4D Bend View More
  • Tel: +86 157 2731 7311
  • Fax: +86-317-6392671
  • E-mail: sales@whsteelfittings.com
  • Factory Add:

    Zhenggang Industrial Park, Yanshan County, Cangzhou City Hebei Province, China.

  • Tel: +86 157 2731 7311
  • Fax: +86 10 5716 3742
  • E-mail: sales@whsteelfittings.com
  • Office Add:

    No.8013 FuHuaHongYan Building,HongYan South road,Chaoyang District ,Beijing ,P.R.CHINA

Copyright © WH-STEEL Co., Ltd. All Rights Reserved |Sitemap|

Chat Online
kellyzhang200454 WhatsApp Wechat QQ QQ
Exhibition

Middle East International Petroleum Expo

Time: 11-14 NOVEMBER 2019

Booth No: booth 10434, 10th Hall

Country: ABU DHABI, UNITED ARAB EMIRATES